裸体xxxⅹ性xxx乱大交,野花日本韩国视频免费高清观看,第一次挺进苏小雨身体里,黄页网站推广app天堂

廣東美國分析儀廠家報價

來源: 發布時間:2021-09-13

Procedure – Powder/Chip Samples

Determine the instrument blank.

Press the Analyze button on the instrument screen again, the loading head slide-block will close and the lower electrode will open.

Clean the upper and lower electrode either manually or remove the crucible and press the analyze button to clean with an automatic cleaner if applicable.

Add approximately 0.05 g of *** Graphite Powder to a 782-720 Graphite Crucible.

Firmly place the crucible on the lower electrode tip or appropriate autoloader position.


***紅外池的恒溫絕熱技術消除了外界環境溫度的干擾。廣東美國分析儀廠家報價

廣東美國分析儀廠家報價,分析儀

Software Features & Benefits

Cornerstone brand software is divided into four main sections—Analysis, Diagnostics, Settings, and Instrument—for simplified navigation and organization. Toolbars, sliders, and drop-down menus makeit easy to set parameters for calibration and data processing. The software also includes real-time ambient monitors, with fully animated system diagrams. Advanced diagnostic features include a thorough digital on-board manual, maintenance animations, photo illustrations, and screen captures that quickly provide the direction needed without having to refer to multiple manuals. also Cornerstone supports extended data archiving and flexible reporting capabilities. 新疆氧氮氫分析儀采購氧氮氫分析儀怎么選?歡迎聯系上海禹重科技,我司產品質量保證,歡迎咨詢!

廣東美國分析儀廠家報價,分析儀

Procedure - Solid Samples

Instrument calibration/drift correction.

Add approximately 0.05 g of *** Graphite Powder to a *** Graphite Crucible.

Firmly place the crucible on the lower electrode tip or appropriate autoloader position.

Press the Analyze button on the instrument screen, the lower electrode will close and the analysis sequence will start and end automatically.

Repeat steps 3b through 3j a minimum of three times for each calibration/drift standard used.

Calibrate/drift following the procedure outlined in the operator's instruction manual.


Instrument Highlights and Features


Optional Features

Optional boom-mounted touch-screen interface package (M) promotes an ergonomic workspace

Optional Performance Package (P) adds a three-stage carrier gas purification system, and a dual-loop gas dose module

Optional Dual Cooling Package (D) adds an integratedliquid-to-air radiator with dual cooling fans. This DC

option gives the user the choice of liquid-to-liquid cooling, liquid-to-air cooling, or a combination of both

Optional integrated autocleaner (H) automatically cleans the upper electrode and lower electrode tip

Optional 20-sample shuttle loader available



配置SmartLine? Remote遠程診斷功能。

廣東美國分析儀廠家報價,分析儀

Procedure – Powder/Chip Samples

Determine the instrument blank.


Press the Analyze button on the instrument screen, the lower electrode will close and the analysis sequence will start and end automatically.


Repeat steps 2b through 2g a minimum of three times.


Set the blank following the procedure outlined in the operator's instruction manual.


Instrument calibration/drift correction.

Login a minimum of three Standard reps.


Weigh approximately *** grams of a calibration/drift standard into a *** Nickel Capsule; enter the mass and standard identification into appropriate rep fields. If applicable, place the nickel capsule in the appropriate autoloader position.


Note: LECO Reference Materia***o not require preparation. See preparation statement on the reference material certificate. Solid Standards may be used to calibrate when chip or powder standards are not available.




簡化日常分析所需的爐頭進樣部分機械維護工作。安徽LECO分析儀廠家直銷

可選六軸可旋轉觸摸屏幕,增強了操作的工效和直觀性。廣東美國分析儀廠家報價

Procedure - Solid Samples

Press the Analyze button on the instrument screen again, the loading head slide-block will close and the lower electrode will open.


Clean the upper and lower electrode manually, or, if applicable, remove the crucible and press the analyze button to clean with the automatic cleaner


Add approximately 0.05 g of *** Graphite Powder to a *** Graphite Crucible.


Firmly place the crucible on the lower electrode tip or appropriate autoloader position.


Press the Analyze button on the instrument screen, the lower electrode will close and the analysis sequence will start and end automatically



廣東美國分析儀廠家報價

主站蜘蛛池模板: 防城港市| 巨野县| 类乌齐县| 大方县| 遵义市| 迁安市| 长阳| 吴堡县| 连城县| 孟连| 陵川县| 闸北区| 奉新县| 惠东县| 丰顺县| 黄浦区| 炎陵县| 格尔木市| 哈尔滨市| 溧水县| 海口市| 汾阳市| 分宜县| 鸡东县| 永丰县| 中卫市| 沽源县| 沿河| 洮南市| 宣化县| 谢通门县| 苍溪县| 汝阳县| 贵溪市| 六盘水市| 隆林| 乃东县| 潍坊市| 上高县| 百色市| 广元市|